多孔粒状铵油炸药在边坡预裂爆破中的应用

通过工程实践，介绍了利用多孔粒状铵油炸药进行边坡预裂爆破的设计原理及施工工艺。该技术能确保预裂爆破质量。简化施工工序，大幅度降低爆破成本。技术经济指标优越。     

建筑结构抗震第二水准设防目标的分析

文章从强度及变形两个方面论述以构造措施来保证建筑结构抗震第二水准设防目标。     

荧光消除剂的应用研究

介绍了一种粉末状荧光消除剂的应用特性,并对影响荧光消除剂使用效果的因素进行了探讨。结果表明,浆料温度及荧光消除剂与浆料的混合作用时间对荧光消除效果有较大影响。     

环缝错边容器的有限元分析与容限探讨

采用有限元方法对 1台封头与筒体具有较大错边量的容器进行了应力分析 ,得到了错边区域的应力分布状况 ,并对其进行应力强度评定。结果表明 ,该容器错边部位的应力是满足应力分析准则的。通过对存在不同错边量的容器进行应力分析 ,探讨了容器的错边容限 ,对含有错边缺陷在役容器是否合乎使用的判断具有一定指导意义     

A New Method for Comparing Orthonasal and Retronasal Olfaction.

Odors seem to be perceived differently when presented ortho- or retronasally. In this study, stimuli of controlled concentration and duration were applied in either the anterior nasal cavity or epipharynx by means of air-dilution olfactometry. Stimulus concentration was monitored in the olfactory cleft. In Experiment 1, odor thresholds to a food (chocolate) and a nonfood (lavender) odor were lower for orthonasal, compared with retronasal, stimulation. In Experiment 2, intensity ratings to suprathreshold odor concentrations were significantly higher for orthonasal than for retronasal stimulation with hydro- hydrogen sulfide, but not phenyl ethyl alcohol. Accordingly, amplitudes and latencies of olfactory event-related gen potentials to retronasal stimuli were found to be smaller and prolonged, respectively. This indicates differential processing of olfactory stimuli presented through the retronasal or orthonasal routes. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Application of artificial neural networks to the analysis of two‐dimensional fluorescence spectra in recombinant E coli fermentation processes

A two‐dimensional (2D) spectrofluorometer was used to monitor various fermentation processes with recombinant E coli for the production of 5‐aminolevulinic acid (ALA). The whole fluorescence spectral data obtained during a process were analyzed using artificial neural networks, ie self‐organizing map (SOM) and feedforward backpropagation neural network (BPNN). The SOM‐based classification of the whole spectral data has made it possible to qualitatively associate some process parameters with the normalized weights and variances, and to select some useful combinations of excitation and emission wavelengths. Based on the classified fluorescence spectra a supervised BPNN algorithm was used to predict some of the process parameters. It was also shown that the BPNN models could elucidate some sections of the process's performance, eg forecasting the process's performance. Copyright © 2005 Society of Chemical Industry     

伴随内转换电子发射的俄歇电子能量及强度计算

简要介绍了伴随内转换电子发射产生的俄歇电子能量与强度的计算方法、计算程序及工作流程，并以^129Iβ^-衰变为例说明其具体应用。     

Motion compensated film restoration

Motion picture films are susceptible to local degradations such as dust spots. Other deteriorations are global such as intensity and spatial jitter. It is obvious that motion needs to be compensated for before the detection/correction of such local and dynamic defects. Therefore, we propose a hierarchical motion estimation method ideally suited for high resolution film sequences. This recursive block-based motion estimator relies on an adaptive search strategy and Radon projections to improve processing speed. The localization of dust particles then becomes straightforward. Thus, it is achieved by simple inter-frame differences between the current image and motion compensated successive and preceding frames. However, the detection of spatial and intensity jitter requires a specific process taking advantage of the high temporal correlation in the image sequence. In this paper, we present our motion compensation-based algorithms for removing dust spots, spatial and intensity jitter in degraded motion pictures. Experimental results are presented showing the usefulness of our motion estimator for film restoration at reasonable computational costs. Received: 9 July 2000 / Accepted: 13 January 2002 Correspondence to:S. Boukir     

An anti-plane crack perpendicular to the weak/micro-discontinuous interface in a bi-FGM structure with exponential and linear non-homogeneities

Treated was an anti-plane crack perpendicular to the interface of an exponential-type FGM strip bonded to another linear-type FGM substrate with infinite thickness. Through Fourier integral transform, the problem was reduced as a Cauchy singular integral equation, which was further solved numerically by the Lobatto–Chebyshev collocation method. Based on the numerical solution, the effects of the geometrical and physical parameters on the stress intensity factor (SIF) were analyzed and the following conclusions were obtained: (a) A notable discrepancy between the interface-perpendicular crack and the interfacial one is that, to reduce the weak-discontinuity of interface or to make the interface micro-discontinuous will not necessarily decrease the SIF of the former, but will surely decrease that of the latter. (b) When a crack tip is situated very near to the interface (or free surface), its SIF will be high and totally dominated by the interface (or free surface). (c) To increase the stiffness of the FGM on one side of the interface is beneficial to preventing the crack on the other side from growing toward the interface. Besides, some practical suggestions were further given for material design in the field of composites.     

Assessing pre- and post-deformation in the southern Arava Valley segment of the Dead Sea Transform, Israel by differential interferometry

Differential radar interferometry, using archived ERS data over the region of the Dead Sea Transform, allows to detect ground movement (subsidence or uplift) in playas within the southern Arava Valley segment of the Dead Sea Rift. These measurements are consistent with a mean displacement rate of about 0.4 cm/month, in the direction of the radar beam, during the 8-month period preceding the Nuweiba earthquake of 22 November 1995. In the 3 years following the earthquake, the measured rate was smaller by a factor of 10. These movements are not related to salt diapirs or water pumping activities in the area. The exact location, along faults, suggests a possible correlation with pre-seismic and post-seismic fault deformation.A simple fault model consistent with the observed phenomena associates the observed subsidence/uplift to right and left stepping en-echelon fault patterns related to inter-seismic tensional accumulation along the faults. Further observations are necessary on this site and similar fault areas to corroborate the correlation between seismic activity and the observed phenomena. Monitoring of these sites should continue with differential Global positioning system (GPS) measurements and radar interferometric analysis using Envisat and Radarsat as well as archived data (including J-ERS).